Undoubtedly, QuickBooks offers many amazing features and tools with every update to make the accounting process smooth and much easier. But despite being a sophisticated application, QuickBooks is not without flaws like other software. When you try to open a corrupt company file, a backup file, or a missing file, you’ll get QuickBooks error 6147. This error code appears as a warning message on your screen and reads as follows: “QuickBooks Error code -6147, 0 when attempting to open my company file or a backup file”. It could be caused by a variety of factors, but keeping track of the main cause will make troubleshooting easier. This article is a concerted effort to provide users with a complete guide to resolving QuickBooks company file error 6147.
What do you Understand with QuickBooks Error 6147, 0?
QuickBooks Error code 6147 is inherited from the QuickBooks 6xxx series error code that often occurs when QuickBooks fails to restore backup files from the local system or open the data file or backup file. There might be several reasons that can interrupt QuickBooks from opening the company file, like damaged network data files or improper QuickBooks set up. This error code appears as a warning message on your screen and reads as follows:
QuickBooks error code -6147, 0 when attempting to open my company file or a backup file.
Or
QuickBooks error 6144, 82: This is not a QuickBooks data file or there is a problem with the data file.
The error presents Start and Cancel options; however, selecting Start does not always resolve the fault, and the same problems reappear.
What Provokes QuickBooks Error 6147?
There is more than one reason that can trigger such QuickBooks company issues. Let’s check out the below jotted factors:-
- A company file that has been damaged or corrupted
- The file may be corrupted while recovering a QuickBooks backup file from an external device or a network QBW.
- The information or data in your QuickBooks company file is wrong.
- The company file is accessed through a mapped drive that was either accidentally erased or was created by third-party software.
- If the backup file name is longer than the maximum of 210 characters.
- When the Windows registry is corrupted, a technical problem occurs.
- The QuickBooks error 6147 might be caused by a malicious virus or malware assault.
- The QuickBooks Desktop problem 6147 appears to be caused by an incorrect QuickBooks installation.
Signs to Identify the QuickBooks Error 6147
The following is a list of symptoms that you may face if QuickBooks error (6147 0) occurs:
- Windows shuts down automatically to safeguard the computer from damage caused by the error.
- The arrival of error code 6147 0 causes an active program window to crash.
- The system is sluggish in responding to mouse or keyboard inputs.
- The error description displays on the screen when QuickBooks error message code 6147 0 comes on the screen.
- Every time your computer crashes, it only lasts a few seconds.
Effective Troubleshooting Solutions: QuickBooks Error 6147
Now that you’ve learned about the causes and symptoms of QuickBooks Error 6147, you can move effortlessly to the troubleshooting part.. We’ve put together the best possible solutions to get rid of the QuickBooks error code 6147:
Total Time: 35 minutes
Make Use of QuickBooks File Doctor
QuickBooks File Doctor is a tool that detects and corrects a wide range of issues. Install it from Intuit’s website if it isn’t already installed in your system. Simply launch the tool after it has been installed and wait for it to finish its work. After the File Doctor process is finished, try to reopen your company file. Even if the process fails, go ahead and do it. If the problem remains, proceed to the next troubleshooting.
🔹 To begin, go to the official Intuit website and download and install QuickBooks Tool Hub
🔹 On your server PC, execute this tool
🔹 Now select the Run QuickBooks file doctor option from the Company file issues tab
🔹 After you’ve completed the instructions above, the file doctor tool will launch automatically
🔹 To fix the company file issues, follow the on-screen instructions.
Move QuickBooks File to Another Location
🔹 Initially, make sure the system’s hosting is turned off
🔹 Go to the QuickBooks then select File menu >>> Utilities from the File menu
🔹 If you see the Stop Hosting Multiple-User option, perform the instructions below:
🔹 Turn off the Hosting Multiple-User access
🔹 Allow the following window to appear by pressing the “Yes” button
🔹 With the company file closed, click “Yes” once again
🔹 Finally, try to restore the backup file that was previously saved on your system.
Rename the QuickBooks Files Such as .ND and .TLG Files
The .ND and .TLG files should be renamed. These are configuration files that allow users to run the company file in a network or multi-user mode without issue. You can rename the file by following the instructions below:
🔹 Open the folder containing your company file
🔹 Locate the .ND and .TLG files:
🔹 Company_file.qbw.nd
🔹 Company_file.qbw.tlg
🔹 After that, right-click on the file and select rename, adding the word OLD to the end of each file name
🔹 Restart QuickBooks and try to log in to your company file again.
Use Trend Micro Active Scan
If the previous troubleshooting procedures did not resolve the issue, try these steps:
🔹 Find the location of your company file and make a note of it
🔹 Without disrupting the company file, hold down the Ctrl key and then double-click on the QuickBooks icon
🔹 The company file must first appear which is on top
🔹 Now, select the company file from the drop-down menu
🔹 The location of the file will be shown in the company file list you open
🔹 In Trend Micro active scan, go to the scan settings
🔹 At last, make an exception for the file folder you’re looking for.
Make Modifications in the Name of the .ADR File
If changing the names of the above-mentioned files does not resolve the QuickBooks error 6147, you should also change the name of the QuickBooks ADR file (Auto data recovery).
🔹 To begin, navigate to the folder that contains your company’s files
🔹 Next, look for the .ADR file
🔹 Find the most recent file in the .ADR File folder
🔹 Perform a right-click it now and choose “Rename” from the drop-down menu
🔹 Finally, the file should be renamed to .qbw.
Utilize the QuickBooks Install Diagnostic Tool
To locate and repair damaged company files, utilize the QuickBooks install diagnostic tool. You can either download the QuickBooks install diagnostic tool or utilize it from the QuickBooks Tools Hub. This tool is designed and developed to resolve issues that occur during QuickBooks installation.
🔹 In the beginning, shut down QuickBooks on your PC
🔹 On your computer, install the most recent version of the QuickBooks tools Hub application (1.5.0.0)
🔹 Save the file to your downloads folder or anywhere else where it will be easy to discover
🔹 Now, run QuickBooksToolHub.exe to complete the process (downloaded file)
🔹 To install and agree to the terms and conditions, follow the instructions that appear on your screen
🔹 After the installation is complete, open the tools hub by double-clicking the icon on your Windows desktop
🔹 When the tools hub appears on your computer, click on the same
🔹 In the tools center, go to the Installation issues
🔹 Select QuickBooks Install Diagnostic Tool from the drop-down menu
🔹 It will take up to 20 minutes to install the diagnostic tool
🔹 Finally, restart your computer when the tool finishes its search.
Close all QuickBooks Processes
🔹 To begin, log in to the server system as an administrator
🔹 Then, simultaneously hit the Ctrl + Shift + Esc buttons
🔹 By selecting the Users tab, the next step is to display the processes for all users
🔹 Now, draw attention to each of the QuickBooks procedures:
🔹 QBW32.EXE
🔹 qbupdate.exe
🔹 as well as QBDBMgr.exe
🔹 Then select the End Task option
🔹 You must open the company file in multi-user mode to complete the process.
Create a Backup Files at a Different Location
In order to get rid of the QuickBooks error code 6147, you can create backup files in a separate location. This procedure involved the following steps:
🔹 You must be certain that the system’s hosting has not been completed
🔹 Then choose Utilities from the File menu
🔹 If the option to discontinue hosting multiple users is included in the list, go to the next step:
🔹 You’re supposed to Stop allowing multiple user access
🔹 Then, on the window that appears, click on the “Yes” button
🔹 Now, sit still and wait for the next window to pop up
🔹 With the company file closed, also click on the “Yes” tab
🔹 To complete the process, restore the backup file on your computer.
Try Accessing the Rebuild Utility
If none of the solutions work out then you can try out the following steps to remove the QuickBooks Error 6147:
🔹 To begin, go to the file menu and then to the utilities tab
🔹 Then select the “Rebuild Data”
🔹 In the event that the user is prompted to backup the company file, the next step is to choose the “Ok” tab
🔹 If the software displays the message “QuickBooks is not responding”, press the “Ok” button.
In Conclusion
Hopefully, this article covers the major information regarding QuickBooks Error 6147 and how to deal with it. To know more about accounting software & best resolution of QuickBooks errors or any other functional glitches, you can easily reach the QuickBooks Helpdesk Team to get better assistance with less delay. The team will dedicatedly be committed to serving your doubts all round the clock.
FAQs:
Do we Overcome QuickBooks Error 6147 by Disabling the Firewall Application for a Short While?
A firewall is a type of network security software that controls inbound and outgoing traffic on your computer. Consider the case where you’re having trouble accessing a file over the network or restoring a company file. In that scenario, you might try disabling the firewall application to see if it’s the firewall or something else that’s producing QuickBooks error code 6147. The following are the steps to disable the firewall application:
🔹 Click the start menu button with your left mouse button
🔹 After that, type Control panel and left-click on the icon for the control panel
🔹 Select System & Security from the Control Panel
🔹 In the system & security section, select Windows Firewall
🔹 From the left side pane, toggle on and off Windows Firewall
🔹 Finally, switch off the firewall settings by selecting the radio button.
🔹 Make a note that there are three options for disabling the firewall: turn it off for only the private network, turn it off for only the public network, or turn it off for both networks.
Is There any other Tool apart from QuickBooks File Doctor or Install Diagnostic Tool that I can use to Fix the QuickBooks Error 6147?
Yes, you can also try running the Quick Fix my Program from the Intuit Tool Hub as it helps to fix QuickBooks common errors. It is pretty easy to use; you simply have to select the company file issues from the Tool Hub. Then, choose the Quick Fix my file program and then select the “Ok” button once it is done. Finally, you can run your QuickBooks.
How do I verify the location of QuickBooks company file, if QuickBooks looks for the company file in the wrong folder? Will it help me to resolve QuickBooks Error 6147?
You will discover the company file on the system and place it in the relevant company file folder using the processes outlined below:
🔹 Press the F2 key on your keyboard to open QuickBooks
🔹 Take note of the location of the company file in the File Information section of the Product Information window
🔹 Make that the company file is still there by going to the file location
🔹 If you can’t find the company file inside the QuickBooks folder, use the
🔹 Search Programs and Files search box to look for it
🔹 Type .qbw into the search box, and when the system displays all files with the .qbw extension, right-click the appropriate corporate file
🔹 Choose the Open File Location option
🔹 Open the company files in QuickBooks after moving it to the proper folder.
🔹 And yes, it may help you to resolve QuickBooks error 6147 in many cases.
